|
|
|
|
Products
Acoustiblok 6MM
6mm (0.6cm) – 8.66kg per square metre (psm) format ideal for floors or to combat insistent low frequency noise with a sound reduction index (SRI) rating of 32dBA.
Acoustiblok is available in rolls of 1.37 metres (4' 6") wide and 30.48 metres (100') in length.
AcoustiFACT : Reducing sound by 10dB will approximately halve the sound to the human ear.
|
|
|
Acoustiblok 6mm noise isolating material is used as
a structural treatment for reducing sound transmission.
It contains no lead or asbestos materials and is typically applied as part of a layered wall or floor construction, either tacked to the studs prior to drywall or draped over joists before sub-floor.
  
Acoustiblok reduces sound transmission even in low frequencies under 100HZ. Ceilings and doors are also suggested treatment areas to further reduce sound transmission.
Acoustiblok is UL (United Laboratories) approved in walls, floors and ceilings. It is impervious to water or moisture, very flexible and cuts with a box knife. It can be nailed, stapled or glued and is non corrosive, and temperature tested up to 200 degrees. Acoustiblok will not mildew - ideal for basements or in attics- and will not compress under carpet and is highly UV resistant.
> Acoustical Data - Click Here > Acoustical Report - Click Here > COSSH Data - Click Here > Tech Data - Click Here |
|
|
|
|
|
|
|
