|
|
|
|
Products
Acoustiblok 3MM
3mm (0.3cm) - 4.88kg per square metre (psm) which offers a sound reduction index (SRI) rating of 26dBA – six decibels more than lead.
Acoustiblok is available in rolls of 1.37 metres (4'6") wide and 18.29 metres (60') in length.
AcoustiFACT : Reducing sound by 10dB will approximately halve the sound to the human ear.
|
|
|
Acoustiblok 3mm noise isolating material is used as
a structural treatment for reducing sound transmission.
It contains no lead or asbestos materials and is typically applied as part of a layered wall or floor construction, either tacked to the studs prior to drywall or draped over joists before sub-floor.
  
Acoustiblok reduces sound transmission even in low frequencies under 100HZ. Ceilings and doors
are also suggested treatment areas to further reduce sound transmission.
Acoustiblok is UL (United Laboratories) approved in walls, floors and ceilings. It is impervious to water or moisture, very flexible and cuts with a box knife. It can be nailed, stapled or glued and is non corrosive, and temperature tested up to 200 degrees. Acoustiblok will not mildew - ideal for basements or in attics- and will not compress under carpet and is highly UV resistant.
> Acoustical Data - Click Here > Acoustical Report - Click Here > COSSH Data - Click Here > Tech Data - Click Here |
|
|
|
|
|
|
|
